X Axis Leveling Blocks Guide for Ender 3 V3 SE KE

These blocks have been designed to be used with the Ender 3 V3 SE and KE models only. Another user has verified that it will work with the KE model.

The right and left side are slightly different heights as the plastic molding thickness on the left and right side is not the same (it is 1.9mm thicker on the right side).   Please review the included instructions PDF on how to use these.  

This Ender model creates some challenges for adjusting the X axis because there are beveled areas on the floor of the printer, there are different thicknesses of plastic moldings on each side of the X axis, and there is limited space to use other objects.   The official Creality video on setting the x axis shows to use glue sticks on top of the plate.  A plate that is very likely not level.  

By using these blocks, you will achieve perfect level!

I recommend a brim and to turn the fan OFF to reduce warping.   Make sure brim is cleaned off properly before using the blocks.  Make sure blocks are fully cooled before removing from print plate to reduce alterations to their form.   Even a little warping will reduce their accuracy.

PLEASE READ THE INSTRUCTION PDF before starting.  There is important information and I have also provided images.


*I measured the depth of the plastic molding on each side multiple times. After printing the model I verified they worked appropriately. 
If your printer currently has a X axis that is not level, this should not affect this print model's usefulness if you print it in the orientation that the file loads or use the Gcode file directly.