Screwdriver Holder Rack for Toolbox Drawers

Screwdriver Holder Rack for Toolbox Drawers

Just a simple way to organize your screwdrivers.

This is the next model in my quest for toolbox organization! This model is inspired a little bit by the Harbor Freight Screwdriver Rack (56655) but shrunken down to fit on a build plate. I just wanted a simple way to compactly store my screwdrivers so they wouldn't be rolling around the drawer. Doesn't require much infill at all (you might get away with 0% if your printer can bridge the top layer well enough). I printed mine with 10% cubic and that was Plenty!

Alternatively, you could print with zero top and bottom layers and the infill of your choice to save filament and for a really cool effect.

Print two of them so you can support both ends of the screw driver.

EDIT: I just uploaded a second STL with pockets to fit three 6x2 magnets in the print. Simply pause the print at 16mm and drop the magnets in the slots. This should keep it from sliding around as much in drawers without liners.

Enjoy!