Ikea MALM Lift Bed Support Cushions

These cushions are printed out of TPU and use a small piece of 3M VHB (any double sided tape will do) to hold them snugly in place. My bed started to rub through the paint on the supports for the lift bed platform and was starting to make noise when getting in/out of bed and felt like it was shifting a lot and felt cheap.

These TPU cushions are approx 3.5mm thick (about 1/8") and allow the bed to still lock in place and lift easily, but removes all movement and noise it was previously making. You will need 4 corners and 4 inner pieces

In my case, it is on a Queen Ikea Malm Lift Bed, but it should be the same for the full/double bed as well (the part numbers for the supports are the same between the two sizes)

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.15

Infill:

Filament: Overture TPU Blue

Category: Household