Stable Doorhandle

The doorhandle fits 40 mm thick doors with an 8x8mm handle bar.
This corresponds to the German standard room doors.

Required Parts:
 

3D Printed:

• 2x Door Handle Inner
• 1x Door Handle Left
• 1x Door Handle Right
• 2x Door Keyslot cover (optional) 
• 2x Door Handle cover (optional) 

Used Filament:

• Black: Prusament

Extra Components:

• 8mm square aluminum 400mm [DE]
• 2x M5x20 screw

Assembly:

Step 1:

Cut the Aluminium Profile to size:

2x 90mm
1x 150mm

Step 2:

Cut an M5 hole on the top of each 90mm long rod.

Preferably something nicer in the middle like me ;)

Step 3:

Drill a 5.5mm hole on the right and left of the 150mm long rod at a distance of 4mm so that you can screw the aluminum parts together:

(Make sure that your screw head has a diameter of less than 8mm, if necessary you can sand it down a little.)

Step 4:

Cut a slot in the screw head so that you can tighten it later with a screwdriver.
(You can use a hacksaw or flex)

Step 5:

Attach the 3d printed parts and, if necessary, glue the handles to protect them from slipping out.

Have fun building the project!
Stay ceative!