USB stick label (generic and prewritten)

Use case

This is a simple label for a key ring or a USB stick. Thanks to not having a paper label, it should be very durable. Especially if you print the upper most layers with another color, it will never wear out. 

Printing

This is a very simple part and a very easy print. Unless you need this part to be somewhat temperature resistant, you can simply print it from PLA or any other material that you are familiar with. Simply put it on the print be in your slicer in the uploaded orientation. Infill is not critical at all, there is no need for supports. 

Adding your own text

Check out this article in the Prusa knowledge base, to learn how simple it is to write your own text to the label: https://help.prusa3d.com/article/text-tool_399460

Colorizing the text (if you don't have a MMU)

You can either colorize the embossed text with a pen (sharpie) like it did, or you can change the color of last 2 or 3 layers like described here: https://help.prusa3d.com/article/color-change_1687

Happy printing!