Hybrid Coaster - Display Track

This track is compatible with the 1:15 scale Hybrid Coasters.
You can find the assembly instructions in the files.
In addition to the 3D printed parts, you will need round rods with a diameter of 1.5mm and plastic glue for this model. I recommend using my Wire Cutting Tool to cut the round rods to size.

I-Box Track

This model is a section of a straight display track. Print it as often as you like to get the required length. Combine this model with the flange track for more realistic details.

I-Box Track - Flange

Use this model in combination with the simple track. I recommend using a flange every 3 sections.

Display Track - Front Car

This 10-degree inclined display track is designed for a single front car. It also includes a brake to prevent the train from rolling down.
Place the train from below and push it into the brake. When you release it, the brake should hold the train in place. Push the train out upwards to remove it from the track.
If the brake does not work automatically, use the handles.
For better grip you can stick anti-slip tape on the brake shoes.