Spool Platform for Elevated Spool Holder

As stated in my Narrow Spool Holder Guide model  I have very limited space.  I designed this to be sturdy, large enough to fit over the other three spools and easy to assemble.

You'll need 9x M3 screws and 5x M3 nuts.  For the legs, I used some leftover 30mm screws from the MMU3 build but anything 16mm and longer should be sufficient.  For the 5 holes that hold the middle of the table together (including the keys) the M3 screws should be 8mm.  The holes on the top annd bottom keys are countersunk for the screws and nuts for a flush finish.

There are two versions of the top key.  One has another key that fits the groove on the bottom of the Narrow Spool Holder Guide model.  The second version has the key removed so that the entire top surface is flat.

I hope you enjoy this as much as I did designing and printing it!