May 5, 2024
Description
Kakashi Hatake - Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Jayo Meta Gray Transmission Distance: 3.5
PLA EryOne PLA+ IVORY WHITE Transmission Distance: 5
PLA EryOne Rose Red Transmission Distance: 4.5
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Gray
At layer #19 (1.6mm) swap to WHITE
At layer #28 (2.32mm) swap to Red for the rest.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
C3D
