MIN_SB01_80

Welcome! Your MIN journey has begun!

I was super excited when Rolohaun released his micro delta MIN, Obviously I had to make a few changes to satisfy my desire for compact mini machines! 

(The aluminium Bed Plate is custom, if there is enough interest I will make them available to purchase)

If you like what I create you can buy me a coffee here: paypal.me/handfullofnuts
Thank you : ) 

CHANGELOG 030624:

Updated/Added

• Arm Jig Model

CHANGELOG 270524:

Updated/Added

• BOM
• Assembly 
• Carriages and Effector now using M3x30 with sq-nuts instead of 5x50 Standoffs
• Slotted CABLE_CHANNEL lower fixing holes to compensate for shrinkage/expansion
• Orbiter 2.0 mount

CHANGELOG 170524:

Updated/Added

• 6 or 10mm wide drive belt options.
• Lower cable channel mounting holes relocated.

Click HERE to view in 3D

Click HERE to view BOM

Have a look at the original MIN  

Changes include:

• Revo micro hotend assembly with dual 3010 fans
• 9 or 10mm wide belts
• Idler mounts
• Motor mounts
• Carriages with Apex Belt Clips 
• 80x75mm Build volume
• 100mm heated build plate
• Modular Mainboard mounts 

The assembly has motion joints applied, check the component drag under select or move feature to articulate the motion system of the printer. 

Have a look at the original MIN

Useful information:

CARRAIGE OFFSET = 16
ARM ANGLE = 62.1
EFFECTOR RADIUS = 23
MIN ANGLE = 20
MAX ANGLE = 90
RADIUS = 40.239
arm_length: 86
delta_radius: 63.239
print_radius: 42.5