May 10, 2024
Description
Prevent your Powerpole connectors from accidentally separating. The clip fits into the existing retention holes with a slip friction fit. Still removable by fingers thanks to a ridge on the clip, but will stay under vibration and normal usage.
Use with a single connector set, or add as many as desired for triple, quad pairs, etc.
Has been tested to >20lbf pulling force along the wire in PA-CF, with similar results in PLA and ABS. Must be printed laying FLAT on the print bed (otherwise the pegs will shear off).
Works with PP15, PP30, PP45 housings.
License:
Creative Commons — Attribution — Noncommercial
8
theworkshope
