Collapsing Wolverine Claws

There is a pivot that keeps the claws together but allows them to be spaced perfectly in between your flingers.

They print-in-place, you will need very good layer adhesion and it is very sensitive to the first layer height. Any type of elephants foot will keep them from extending all the way.

Supports are not required, for best results use a .4mm nozzle. If this is your first time printing a print-in-place sword, a test print can be found here. Find detailed instructions on how to print collapsing swords on my website.

Printed on the Mulcore Core-XY 3D printer with Polymaker Metallic Pro PLA