May 10, 2026
Description
Scout339's 'SmolStop' Hand Stop, inspired from Driven Arms ShortStop.
Requires 1x T-Nut for MLOK.
For duty-grade strength, I recommend 6 walls and 50% infill. I've tested it with ASA, but PLA+ and PETG should also work. Filled Nylon (and PET-CF, but I haven't tested that enough) will be even stronger.
you can orient the print any way that makes sense, but I've printed with MLOK slots facing the build plate (upside-down) or at a slight angle.
Fuzzy Skin Settings used in second picture are as follows:
0.1mm layer height
0.2mm thickness
6mm density
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11
Scout339
