Filament Storage Solution

These travel bags are cheap and great for filament storage, and for smaller prints you can even use the filament directly out of them by pulling some meters out - no need to open them. 

Also have some Silica Gel Desiccant bag inside.

Here you find

• the feed-through 
• with clip
• a ring clip to mount the Hygrometer from inside the bag

Instructions

• hold the hygrometer from inside the bag 
• clip the ring from the outside on
• put the PTFE tubing in the bushing by twisting - maybe warm up (or use the other one)
• Filament in the bag and through the bushing
• put this between the two seal  lips near the end of the bag and close as far possible
• clip over the bag to hold the lips in the grooves

The clip doesn't need to be opened or removed when changing the roll in the bag - also place so that the filament rolls tangentially from the roll in a straight line up.

The seal stripes have 7.5mm distance - scale accordingly if yours differ