February 6, 2025
Description
Update 01.06.2024:
Added V2. New:
- body/chassis is now one part (front integrated). The needed print bed sizes has increased!
- complete new repaint (closer to the original car)
Update 26.05.2024:
Fixed error in 3MF-file.
Summary
This is a model of a Nissan Skyline (R34) GTR in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate spoiler and exhaust :)
After printing, the model can be assembled with the help of integrated connectors.
The wheels can be turned, but the car will not roll.
Versions
The complete set is available in a STL file for a one-color print.
There is a 3MF-file with predefined colors intended for users of AMS or MMU.
Otherwise, the body, rims and tires must be printed separately.
V1 is desired to fit smaller print beds.
Print
Print with 0.15 layer hight or lower to bring up the details. I printed mine in 0.2mm layer height.
No supports are needed.
Use 3 perimeters and 10% infill.
Post processing
The small struts can be removed really quickly and cleanly using a side cutter.
Please remove the predesigned supports under the front and rear axles.
Assembly
The kit is easy to assemble. All parts fit together very well.
Use some grease for the hole in the rim so that the wheel turns more easily.
If a part should be loose, superglue can be used.
Dimensions
The fully assembled model has the following dimensions
Height: 48mm
Depth: 164.4mm
Width: 70mm (including side mirrors)
The complete kit card has the following dimensions when printed
Height: 39.5mm (V2: 39.5mm)
Depth: 158.8mm (V2: 169.5mm)
Width: 137mm (V2: 121.5mm)
Scaling will work in a low range due to the tolerances.
Other models
I will also try to publish other car models. Stay tuned!
I hope you had as much fun printing and assembling it as I did :-)
Due to regulations in Germany, I cannot open a Printables Club as a private person. I will therefore publish all premium models free for everyone.
Do you like my work? I would be very happy if you would support my work on Ko-fi.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
The Kit Card Guy
