SpaceMouse Mini - Slim profile

Changelog

• 2024-05-25 - Updated the Frame STL. screw holes for fastining the base were too shallow

---------

A slimmer profile frame and base for the mini-ish spacemouse from Teachin Tech

The total height is 10mm lower than the original.
Although it may not seem like a lot, it make the device a lot more comfortable to use

Also provides an access to the Arduino micro USB port for easy plug/unplug

Original Left / Slim version Right

Note: It is still possible to get the same height as the original by adding the 10mm spacer if you really want to do so.

Assembly

You will need to solder the wires directly to the Arduino Pro Micro to make it fit inside the spacemouse

In order to keep the profile low and organize the wires, I like to solder them pointing toward the center of the board, and wrap it with a heatshrink

Then you can place the board inside the base, and fix it with hot-glue or zip-ties