November 10, 2019
Description
This is a slip fit pair of clamps originally intended to hold a Linksys 8-port WorkGroup Hub on the wall. It grabs the housing on the outer edges allowing the network cables through.
When the holding tab screw diameter is set to 5 (default) it allows a 3/16" dia Tapcon easy access.
Makes a left and right clamp.
Use supports for the hole slots. Print with at least 25% fill.
Current defaults are for making a pair of clamps for a LinkSys Model EFAH08W hub, and using a 3/16" diameter Tapcon cement screws.
License:
Creative Commons — Attribution — Share Alike
8
Startrekfan2
