Conqueror Challenge Medal Hanger

This is a simple hanging mount to display your conqueror challenge or other medals! It has space for 5 medals to be displayed on a wall. It has mounting points for two screws, it is recommended you use drywall anchors if you are not mounting into a stud. 

There are two versions - a “Conquered” version with the word Conquered displayed above the medals, and a simple “No words” version which is simply the mounting points for the medals.

If you want to print in two colors, input a color change option in your slicer just after the layer where the horizontal mounting bar finishes printing. There are “2color” GCODE files available for the MK3.9 that are pre-sliced for this color change. 

Any standard printing profile should work, I used 3 perimeters, 15% infill, .2mm layer height, and zero supports.

Display your accomplishments with pride!