November 8, 2019
Description
Alejandro is a friend from RCT. It is 308 mm long x 64 mm high x 20 mm deep. The name is made using SketchUp but it is too long for my Prusa i3 MK3 bed. So I used Microsoft's 3D Builder to subtract a small notch between the 'a' and the 'n' from the back. Then I used Prusa Slicer's Cut feature to separate the model in two pieces. After they were printed, I glued the notch in place with gel cyanoacrylate.
No rafts / no supports
0.3 mm resolution at 15% infill
AMZ3D PLA green
It is all the same material but the photos come out differently due to the lighting and automatic settings.
I have included the whole 'Alejandro' and the two pieces 'Aleja' and 'ndro' as stl files.
License:
Creative Commons — Attribution — Share Alike
Startrekfan2
