November 30, 2021
Description
My coworker broke the keyring part of his authenticator YEARS ago, he just randomly asked me if I could make something so that he could get that function back, and here we are.
Although it sits in tightly, I added recesses to use 15mm M3 machine screw and nut, just to make sure it's not going ANYWHERE, I mean he's had it for like a decade.
Printer:
Davinci 1.0 modified
Rafts:
No
No
Resolution:
.2, but I doubt .1-.3 would make it function much different.
100%, but I use 5 shells, so 10% would likely be ok
Notes:
I used PLA for the better layer adhesion to minimize the likelihood of it splitting and letting go, but ABS w/ an acetone polish may work as well and look better.
License:
Creative Commons — Attribution
DC
