This is a Remix of Baccula's Revo Nozzle Holder for Voron v2.4 (https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/baccula/revo_skirt_nozzle_holder).
I changed the skirt to fit my voron 2.4r1, wich has a slightly different skirt shape.
Bill Of Materials
- 2x 6mm x 3mm Round Magnet
- 2x M3 Heat-set insert
- 2x M3x8 BHCS (SHCS will work as well)
Instructions
- Print skirt and nozzle holder parts (the skirt piece will be placed in the right-front position of the printer).
- Install the 2 heat-set inserts into the ends of nozzle-holder part.
- Install 1 magnet in the skirt, and 1 in the nozzle-holder such that they attract each other when the door is installed.
- Insert the nozzle holder into the skirt and fasten with 2 M3x8 BHCS
- Remove the stock skirt piece from your v2.4 and install the new one in its place (Note, you will likely need an angled hex driver or ball-end driver to install the skirt bolt with the nozzle tray installed).
PurchenZuPoden
