Water Tube Clip (20mm & 25mm)

This is a clip to hold your water bladder tube in place. When you press the water tube, a satisfying click let you know that the tube is secured in place.

Easy to print, no support, no assembly, easy to install

Dimensions:

• 2 size of straps: 20mm and 25mm (¾ inch and 1 inch)
• Water tube diameter : 10mm

Print setting:

• Any nozzle size
• Any Layer height
• No brittle filament, PETG, ASA, ABS or at a minimum PLA+ is recommended
• I recommend a minimum of 6 perimeter for strength (as per the picture) !

This specific make is printed at 0.2mm layer height, 0.4mm nozzle, PETG, 7 perimeters.

Please leave makes, comments and suggestions, I do actively maintain this model. DM me if you need this model with a different dimension for your specific need.