June 18, 2024
Description
Spread cream or similar with this simple spatula. Here is my design to easily print a 113x22mm spatula.
My print is made in 1.75mm eSUN PLA+ White filament, with 0.2mm layer height and 15% infill on a Bambu Lab X1 Carbon printer. Print supports are not required.
I hope that you can find this print useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.
For my latest models, see my main uploads site at MakerWorld as “Wiseone”.
License:
Creative Commons — Attribution — Noncommercial
Wiseone
