Slimer from Ghostbusters Magnet / 3MF Included / No Supports

Introducing the perfect blend of spooky charm and practicality: the Slimer Magnet!

Crafted with meticulous attention to detail, this magnet perfectly captures the mischievous essence of the iconic ghostly specter from the Ghostbusters franchise.

What sets this 3D model apart is its user-friendly design. No supports are needed for 3D printing, making it an exciting project for DIY enthusiasts of all skill levels.

If you have a multicolor 3D printer, the possibilities are endless. Bring this ghastly ghoul to life in vibrant hues, adding an extra layer of customization to your decor.

Experiment with different filament colors for even more personalization; glow-in-the-dark or black light-reactive filaments can create a truly remarkable effect.

For this project you will need a 10x3mm Neodymium magnet per Slimer.

"All of my models are for personal use only, unless you are an active subscriber of Thangs with a commercial license."

3D PRINTING SETTINGS:

-No supports needed.

-Use the 3MF compatible with Bambu Studio, or add a pause at 3.56mm height. The add one 10x3mm magnet inside and press continue. If you don't have Bambu Studio you can add a negative part to the model on the Slicer.

-2 Walls, 0.12-0.16mm layer height and 7% rectilinear infill is recommended.