August 20, 2024
Description
CERCA | Modular Screen Table Lamp E14, E26, E27
Modular screen table lamp. Endless possibilities.
1 base + 4 screen sizes
Mix and match the colours to make your own unique combination!
The screens (2 square, 2 rectangular) simply slide onto the base.
They print extremely fast.
Just a perimeter frame and a mesh.
No endless flat faces taking forever to print.
So count 20min for the smallest one (125 x 200mm),
And up to 40min for the largest one (245 x 253mm).
The base comes in 2 versions, for either E14, E26 or E27 sockets.
You can get the power cords from Amazon here: For Europe: E27 cord: https://amzn.to/3OVrZjK E14 cord: https://amzn.to/3TchBqs
For the US: E26/E27 cord: https://amzn.to/3U0Xyvy
Happy printing!
DIMENSIONS (base) | W80 mm x L102 mm x H250 mm E14 base opening: 29mm E26/27 base opening: 42mm
SCREEN (Rectangle S) | W125 mm x H 200 mm x D3 mm
SCREEN (Square S) | W200 mm x H 200 mm x D3 mm
SCREEN (Rectangle L) | W155 mm x H 253 mm x D3 mm
SCREEN (Square L) | W245 mm x H 253 mm x D3 mm
3D PRINT SETTINGS
All STL files are already oriented properly.
The screens print flat and come as full models (without mesh).
To create the mesh pattern, use 4 perimeter walls and cancel the top and bottom layers (set to 0 layers) and select an infill pattern of your choice.
The screens on the pictures where printed with 25% Gyroid infill.
Less infill and you will get larger holes and maybe a cooler projected-shadows effect, but the light bulb will be more visible as well.
SCREENS:
Layer height: 0.3mm/layer or less if you fancy
Wall line count: 4 (for 0.4mm nozzles)
Top layers: 0
Bottom layers: 0
Infill: 25%
Infill line width: 0.8mm
Build adhesion type: None
Supports: None
BASE:
Infill: 20 to 30%
Wall line count: 2
Resolution: 0.3mm/layer or less if you fancy
Build adhesion type: None
Supports: None
The base on the pictures was printed with some “fuzzy skin”.
License:
Commercial Use - No Derivative
Charles Regaud
