V1 & V2 BallBearing spool holder (6 spools) for (Un)original Prusa Drybox

I created the support for the bearing that can accept 6 spool at the same time

V1: the spool ride directly on the bearings

V2 the spool ride on printed cylinders rolling on bearing. V2 example on the last picture.

You need :

• 2 X end pieces
• 5 X middle pieces
• 24 X pins
• 12 cylinders (Only compatible with V2)

I suggest to print one pin of each size as a test to pick the correct tolerance.

UPDATE : 18mm, 19mm and 20mm variant. This refer to the horizontal mounting metal rod.

Please leave makes, comments and suggestions, I do actively maintain this model.