December 12, 2021
Description
You need transparent filament (PLA)
1 LED (5mm)
2 button cell(AG3/392/LR41)
glue to glue the printed parts together
parts 1x:
case_01
case_02
loop
washer/part of an elastic band
center
and:
8x: face_3
17x face_4
you don't need any support, I use 0.2mm layer high.
Print the loop seperate so that you get a smooth thread!
Check the printet(face) parts that they match in the center, maybe you have to clean it.
On one of the fotos you can see how the illumination part get together; you don't need any glue for this part.
The rotary switch is very simple, so use it carefully.
The loop with the LED is only plugged in, the other parts are glued in.
Instead of the washer, you could use a elastic band; it works like a spring.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Merandey
