BFight 210 Slide On Motor Protector 22-23xx

This is a motor protector i designed for the BFight210 or BFlight210 Frame.
It can easily be mounted securely by using just one little zip Tie.

I designed it to be used with the Brotherhobby Returner R5 2306 Motors but should be a good fit as well for any 22-23xx motor

There are 2 versions in 30 and 31.5mm inner diameter.

Leave a like and share your makes if you find this useful ;-)

Print instructions

Category: R/C Vehicles Print Settings

Printer: Kossel XL

Rafts: Doesn't Matter

Supports: No

Resolution: 0.2mm

Infill: 10-15%

Notes:

Print this in TPU with 1 or 2 Perimeters.
It has been designed especially to be printable without support

How I Designed This

This was designed using a scan of the actual Arm in Fusion 360