3D Printable Earring - Colors Of The World

Introducing my second earring design. It represents the world with all it's life and colors. It's a multipart print (earring and color insets) that needs to be glued together. I've printed the insets using transparent PETG filament.

The colors & material used for the insets are just guidelines, you can get creative with the color scheme for a personal touch.

It's a quick and easy print and you can add an extra touch by using sparkle filament or print on pattern transfer bed plates.

The earring is available with a flat or upright ring to attach hooks or pins. You can get those on Amazon:

US

• https://amzn.to/3XZkn55 (affiliate link)

EU

• https://amzn.to/4eVo69T (Amazon BE - affiliate link)
• https://amzn.eu/d/0fKqgYSS (Amazon DE)
• https://amzn.eu/d/08mr7WF5 (Amazon UK)

Print instructions

• Since the earrings have fine details and print-in-place features bed adhesion is key.
• Print the front of the earring towards the bed plate and the colored insets with the back towards the bed plate
• Initial layer height: 0.2
• Layer height: 0.08
• Wall generator: Arachne
• No supports needed
• 100% infill
• Outer wall speed: 60mm/s
• Inner wall speed: 120mm/s
• Overhang speed: 60mm/s
• Bridge speed: 50mm/s
• Infill & top surface speed: 150mm/s
• Insets with top layer "Octogram Spiral" (optional)

Once printed you need to carefully bend the upper part of the earring (hanger part) up and down to free it up.

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller subscription.