"Stargazer" - Bookmarks Set

___________________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
________________________________________________________________________________________________________________________


The "Stargazer" bookmarks feature a charming black cat gazing at the night sky, surrounded by whimsical flowers and a crescent moon. Perfect for dreamers and book lovers alike!

For best results use 0.2 nozzle if possible.
The design allows for printing simultaneously with simple color changes at layer, which saves a lot of filament!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA KINGROON Black Transmission Distance: 0.4
PLA KINGROON Blue Transmission Distance: 4
PLA KINGROON Sky Blue Transmission Distance: 2.6
PLA Geetech Silk Gold Transmission Distance: 0.7
PLA 3D Jake Eco White Transmission Distance: 2.5
Color Pallete:

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #12 (1.04mm) swap to Sky Blue
At layer #16 (1.36mm) swap to Silk Gold
At layer #19 (1.6mm) swap to White for the rest.