A simple machine vise I made with some leftover aluminium extrusion.
You'll need the same extrusion profile for it to work.
Part you'll need:
- One printedMoving_Jaw.stl
- One printedJaw.stl
- One printedFixed_post.stl
- One printedHandle.stl
- At least 270mm 30 "I-type" 60x120mm profile aluminium extrusion. This would give you ~100mm jaw opening. Longer extrusion gives you bigger opening
- 14x M5x35mm socket head screws (DIN912/ISO4762)
- 4x M5 nuts for the aluminium extrusion
- 1x M6X10-28mm countersunk socket head (DIN7991/ISO10642)
- At least 190mm M16 threaded rod (DIN975/ISO whatever), this is for 100mm jaw opening for a bigger opening you'll need a longer one.
- 1x M16 nut (DIN934/ISO4032)
Assembly
You'll have to drill and tap (M5) into the extrusion on both ends. This is so the fixed post and fixed jaw can be attached.
LXO
