RC ducted fan Skier

The start of my week of things, some useful some just for fun. I thought this would force me to post some of my projects. Most are semi useful/functional and some are purely inspirational.
This RC skier is made to be easily printed and assembled. It works best on ice or hard snow. On soft snow the resistance on the skis is to much for a ducted fan.

Printed part list:
2 x Push bar.stl
2 x arm.stl
1 x Motormount.stl
1 x Base2.stl
3 x Ski.stl (alternitivly 2 x Ski.stl and 1 x Back_ski.stl. This makes the platform a bit lower in the back, but makes it easyer to assemble)
1 x Base1.stl

Part list:
14 x M3 10mm screw
1 x M3 15mm screw (not needed if you print one Back_ski.stl instead of only Ski.st, then add an extra 10mm screwl)
2 x 9 gram servos
1 x Ducted fan with 55mm OD
1 x Some kind of battery, receiver setup.
1 x Some method of securing everything.