Plum Disinfector Wall Mount 85%

I kept fighting with the cardboard box mount, i was not ideal to mount it to the wall permanently.

I quickly throw together a wall mount box, using 3M VHB tape. If you are not familiar with that specific type of double-sided tape, i would highly courage you to give it a try. By far the best double-sided tape, comes off easy sticks well. As always do not forget to wipe the surfaces with alcohol.

The model is consistent, i believe the ugly edges are because of 0.5  layer height and 0.8 nozzle. The solid layer had much more thermal mass than the thin walls. It would have been nicer with 0.4 nozzle.  Just started to get into 0.8 nozzle.

Lid press-fit works fine on my Prusa MK4, freshly adjusted belt tensions. You could always resize the lid if you are not satisfied with the fitment.

The bottom fitment for the pipe ehh, not great but its okay, it works. Will let you know if there are issues with it.

Added a new Screw mount version, its a triangle so you could you any diameter of screw.

The product:

https://nordik24.com/termek/plum-disinfector-85-kezfertotlenito-folyadek-1000-ml-tasak/

https://nordik24.com/termek/plum-disinfector-85-kezfertotlenito-gel-1000-ml-bag-in-box/

Printed with Prusament Galaxy Black PLA