Peg Adapter for Sand/Wet ground

Included size is 90mm tall and includes a 5mm hole. Please scale in slicer as needed

If the pegs comes out of sand too easily, scale up height
 

Print instructions:

Print out of a strong plastic (strongest you have). I Printed this out of ASA with a heated chamber and low speed

Re-orient part in slicer such that the flat side is on the bed

THERE IS NO BUILT-IN TOLERANCE. A 5MM HOLE IS A 5MM HOLE (The grip should be firm between the plastic and the peg)

If your printer tolerances arent great, ream the hole (with a regular drill bit)