• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Nose Flute - Nasenflöte 3D Printer File Image 1
Nose Flute - Nasenflöte 3D Printer File Thumbnail 1

Nose Flute - Nasenflöte

Sebastian650 avatarSebastian650

December 19, 2021

printables-icon
DescriptionCommentsTags

Description

After a lot of iterations, I present you a well working, simple to print and comfortable to play Nose Flute!

This instrument is as easy to play as it gets, therefore it's also suitable for beginners and childs.
It includes 3 holes. The lower single one meant for wearing it around your neck, while you can use the upper 2 for fixing a elastic band for hands-free playing if you want.

Want a more personal one? Try embossing a smal logo at the front, there is free space ;-)

Important Printing notes:

  • There are two versions at the moment, the difference is in the “Nose angle”. Thats the angle between the bottom, hard part of your nose and the soft “edges” (German: Nasenflügel). It's important to have this roughly fitting, so your nose is air tight to the flute and it is also comfortable to wear.
  • Ensure that the seam is not at the sharp edge of the arcing bit where the air passes over. I don't know the english word, in german it's called “Labiumkante”. This part must be cleanly printed. I recomend to set seam placement to Rear and rotate the part slightly until the seams are lower edge facing the player.
  • The above mentioned tone-generating edge has to be at the exact designed position. I found that Prusa Slicer sets back this edge when “Detect thin walls” is enabled. So disable it as it's not needed anyway.
    Enable the Shell visualisation in the preview to check the result.
  • Use a 0.15mm layer height as there are some quite steep overhangs.
  • No Supports required!
  • You can find a .gcode file sliced for a Prusa mk2 as a reference or for direct use.

How to play it:

  • Hold the flute under your nose so it touches it. This best done by using your index and middle finger positioned on the two small upper holes.
  • Open your mouth slightly, your lips should touch above and below the opening. If done right, you can check by sliding your tongue forward. You should feel the opening.
  • You play it by exhaling through your nose while the volume you form with your mouth makes the pitch. I'm sure you will get it in no time, just try!
  • Hint: If you are used to whistling, you might position your tongue on your lower front teeth. That's not working well here, just leave it in “resting position” down in your mouth.
  • Don't try to look serious while playing it - it doesnt work :-) It's a funny instrument, so feel free to look funny and make people laugh! It's healthy ;-)

Background Information:

This kind of instrument is also called “Tascheninstrument”, which translates to pocket (music) instrument. Like a harmonica or ocarina it's small enough to be carried around without a problem so you can play at alone or with frieds wherever you want. Maybe not so usual nowadays, but a clever thing back in the days without mp3!

License:

Creative Commons — Attribution — Noncommercial — Share Alike

Related Models

Thor Mjolnir Hammer Bic Pen preview image

Thor Mjolnir Hammer Bic Pen

effektz profile image

effektz

9,082

Diverse Schilder / various labels  for hobby & makers preview image

Diverse Schilder / various labels for hobby & makers

RPK profile image

RPK

2

Customizable EU License Plate Keychain preview image

Customizable EU License Plate Keychain

John_M profile image

John_M

32

Vorpal The Hexapod Walking Robot preview image

Vorpal The Hexapod Walking Robot

vorpal profile image

vorpal

4,981

MakerZ – Open Source 1/28 RC Drift Chassis by Fails & Makes | Açık Kaynak 1/28 RC Drift Şasisi preview image

MakerZ – Open Source 1/28 RC Drift Chassis by Fails & Makes | Açık Kaynak 1/28 RC Drift Şasisi

Fails&Makes profile image

Fails&Makes

Cacciavite Portachiavi - Scewdriver keychain preview image

Cacciavite Portachiavi - Scewdriver keychain

Butti Maker Studio profile image

Butti Maker Studio

22

Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED preview image

Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED

scottrlindsey profile image

scottrlindsey

4,447

Small Parts Storage Drawers - Organizer preview image

Small Parts Storage Drawers - Organizer

GT 3D Makers profile image

GT 3D Makers

29

8