Pikachu - Pokéball Coaster (Part of set)

______________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
_______________________________________________________________________________________________________________


This Pikachu Pokéball Coaster is the first in a series of delightful coasters featuring beloved Pokémon nestled inside their iconic Pokéballs. Crafted with attention to detail, this coaster showcases Pikachu, resting peacefully among golden sparkles, making it a charming addition to any Pokémon fan's collection. As the inaugural piece in this series, it sets the stage for more coasters featuring different Pokémon, each captured in a moment of calm within their own unique Pokéball setting. Collect them all to bring the enchanting world of Pokémon to your tabletop!

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.3
PLA EryOne Matte Army Green Transmission Distance: 1.5
PLA KINGROON Orange Transmission Distance: 4.5
PLA KINGROON Yellow Transmission Distance: 6
PLA 3D Jake Eco White Transmission Distance: 2.5
PLA EryOne Rose Red Transmission Distance: 2.4
Color Pallete:

Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Army Green
At layer #15 (1.28mm) swap to Orange
At layer #18 (1.52mm) swap to Yellow
At layer #21 (1.76mm) swap to White
At layer #25 (2.08mm) swap to Rose Red for the rest.