Evangelion unit 01 articulated, slightly improved version

Remixed from Meisterodin's model: https://www.thingiverse.com/thing:1805621
Added a few more details: restraining bolt holes and sockets, some vents on the back and shoulder guards and some text, a few more details on head and an openable jaw. I also strengthened one of the waist joints as it broke off when inserting the ball. The core is made out of a standard glass marble which is 16mm diameter, black or dark red and held with epoxy. I know it normally would have an armor plate protecting the core but Ilike it as it is now. The jaw was supposed to be attached with a wire as an axle, but it stays in and moves just fine without it. I also made a second jaw with nubs on sides to form a tighter joint. If your joints are loose adding some super glue to the ball or inner part while detached may help, but with too much it might crack. I also have flipped one shin as they were not symmetrical, but the ones I printed out are the old ones as I only noticed that afterwards. The horn is a bit hard to print and it seems to come out best if printed vertical, also printing hands with fingers facing up is a good idea. It was definitely a good excuse to rewatch the series again in order to get some screenshots as reference material. The core.stl is just a ball, but it is the same scale as the rest so it can be used for scaling purposes. EVA_01-articulated.blend contains the unmodified model and can be used for reference as to how to assemble it properly.