Corona Virus

UPDATE 19 March 2020
https://youtu.be/boG5C1N_idA Virtual Reality Timelapse added. Is this real???

UPDATE 9 MARCH 2020
Corona Virus Targeted Support version 20mm added. Making for an easier support removal process with just clippers. 3mf and gcode has superfine 0.12 layer height setting. The model can be scaled bigger as long as automatically drop models level to floorr is switched off. All supports will scale with the model. You just have to make sure the lowest spike is sitting on the floor within cura

UPDATE 4 March 2020
Mini Corona added, youtube timelapse added

Slightly Bigger 0.2 layer height version added with a raft to help fix the tiny supports needed. If your brim is good, that should also work

Corona Virus. I have added a 3mf for the structural support profile
2mm sq for minimum support area.
Model is from Greg Bejtlich
https://www.myminifactory.com/object/3d-print-coronavirus-2019-ncov-covid-2019-112215
Both Halves are fused together and mesh fixed with Meshmixer. For challenge!

80% support interface density
12% support density

Model is 50mm wide. Printed at 0.12 for Ender 3 Pro 0.4mm Nozzle
Making the model 100mm wide could print at 0.2 layer height but takes ages

Support removal should be with a hot knife and clippers. The bulbs are delicate so just using clippers will probably break them