I made the mount to also fit my quick change system (coming soon) but you can also use it with 3 M3x8mm screws:
You will also need 4 M3x16mm screws and 4 M3 nuts:
I added A 5015 Fan Duct but you can use any one you want, use 2 M3x8mm screws:
The PCB is attached by 3 M3x6mm screws, choose your probe mount, if you don't use any probe than use the PCB_Spacer:
you may need to adjust your Bed offset you can do it with an M206 command.
Buy me a coffee:
blinkybill
