April 2, 2023
Description
A remix of jsirgado's Ekobots - Rubik's Cube.
The screws would slip in the core because the bore was too big, so I narrowed it ever-so-slightly (0.2mm) and gave it a chamfer.
Print without supports.
3mm brim recommended.
Assemble the cube, and tighten all screws firmly. By feeling, try to make sure all screws are tightened to the same firmness. Then unloosen each screw by the same amount - around 1/2 to 2/3 turn has worked well in my experience.
License:
Creative Commons - Attribution
Reavenk
