- Fierce dragons over cliffs and bones.
- No AMS/MMU required, only two color changes.
- Print Settings:
- Layer height: 0.08 mm with a base layer of 0.16 mm
- Infill: 100%
- Color Changes:
- Start with Black (Esun PLA Black)
- At layer 8 (0.72 mm), swap to Silver (Esun PLA Silver)
- At layer 12 (1.04 mm), swap to White (Esun PLA Matte Milky White)
- Notes:
- A 3MF print profile is included for AMS
- Manual printing requires converting color changes to pauses or using the STL
- Do not simplify the model (ignore floating regions warning)
- Scale only in X and Y
- Split objects manually by right-click menu
- Use a lighter or a heat gun to remove stringing
- Want to sell prints? Check our profile for a commercial license.
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
bamingodesign
