Geared Mechanical Box - Tilting Doors 3D Printer File Image 1

Geared Mechanical Box - Tilting Doors 3D Printer File Image 2

Geared Mechanical Box - Tilting Doors 3D Printer File Image 3

Geared Mechanical Box - Tilting Doors 3D Printer File Image 4

Geared Mechanical Box - Tilting Doors 3D Printer File Image 5

Geared Mechanical Box - Tilting Doors 3D Printer File Image 6

Geared Mechanical Box - Tilting Doors 3D Printer File Image 7

Geared Mechanical Box - Tilting Doors 3D Printer File Image 8

Geared Mechanical Box - Tilting Doors 3D Printer File Image 9

Geared Mechanical Box - Tilting Doors 3D Printer File Image 10

Geared Mechanical Box - Tilting Doors 3D Printer File Thumbnail 1

Geared Mechanical Box - Tilting Doors 3D Printer File Thumbnail 2

Geared Mechanical Box - Tilting Doors 3D Printer File Thumbnail 3

Geared Mechanical Box - Tilting Doors 3D Printer File Thumbnail 4

Geared Mechanical Box - Tilting Doors 3D Printer File Thumbnail 5

Geared Mechanical Box - Tilting Doors 3D Printer File Thumbnail 6

Geared Mechanical Box - Tilting Doors 3D Printer File Thumbnail 7

Geared Mechanical Box - Tilting Doors 3D Printer File Thumbnail 8

Geared Mechanical Box - Tilting Doors

3DTechDesigns

Description Comments Tags

Description

All 3DTechDesigns STLs are protected under Copyright Law.
When purchased on Cults3D you have the right to print it for personal use.
To legally sell prints of my designs a monthly active subscription on patreon is required:
https://www.patreon.com/3dtechdesigns

REEL:
https://www.instagram.com/reel/DCFaMOSNh5p/?igsh=ZDl1dHJtNzgxY2th

This box is an extension of the previously released Geared Mechanical Box V2. It uses the same design idea of a bottom and top sungear and 8 turning gear rods. However this time, the lid opens up with a tilting motion of the doors instead of a spinning motion.
Although the box is fully compatible with the Geared Mechanical Box V2, due to the same dimensions of the box, the gear rods and the bottom sungear, every part has a different look. This means that you could combine different parts from this design with the ones from the Geared Mechanical Box V2.

The download also includes a few different inserts to divide the contents of the box.

All parts are assembled without the need of any extra parts such as glue or screws, since everything is 3D-printed.

Note:
With some filaments, especially silk filaments (which have a sticky surface), the mechanism can be a little stiff. In that case I recommend adding lubricant to the contact areas of the gears and gear rods.

To see a short assembly video, please check out this youtube video:
https://youtu.be/C3YM8uqFHmI

Dimensions of the assembled box:

140140x120mm
the dimensions of the biggest single part is 132x132x87mm, so this will be the minimum printer build volume

Filament by Chitu Systems was used for this print:
https://www.chitusystems.com?sca_ref=7289963.Xumdk03X2y
(affiliate link)

UPDATE 20.11.2024:

added "Cards_Holder".stl
adjustet the dimensions of "Cards_Dice_Holder".stl to take sleeved cards

UPDTATE 03.01.2025:

added "Box_V2.stl" because some people encountered problems, where a specific section of the part breaks during printing, when the nozzle collides with poorly printed overhangs. Box_V2 therefore got reinforced in that area in order to reduce the risk of breaking during printing.
For more Information, please see the "Box_V1_V2_Changes.jpg", which was also added to the "Box"-folder

License:

CULTS - Private Use

Geared Mechanical Box - Tilting Doors

Geared Mechanical Box - Tilting Doors

Related Models