Set of switches compatible with Ikea / Brio rails

You will find in this set no less than 14 elements, mainly switches, compatible with the rails sold by Ikea, Brio and many others. You will make your tracks much more fun.

For trains and regular rails, it's here : https://cults3d.com/en/3d-model/game/ikea-brio-compatible-train
There is a set of curves and curved crossings here : https://cults3d.com/en/3d-model/architecture/16-curved-rails-and-curved-crossings-compatible-with-ikea-brio-package-2

IMPORTANT: The files you buy are sold under Copyright. This means that they cannot be sold or distributed for free. Additionally, you may not sell prints made from these files. If you did, you would jeopardize the creation of new designs. Thank you for your understanding.
YOU CAN HOWEVER SELL YOUR PRINTS OF MY DESIGNS by subscribing to the "3D print seller" subscription: https://www.patreon.com/LabLabStudio
ALL MY DESIGNS ARE INCLUDED IN THIS SUBSCRIPTION

The assembly is extremely simple: https://youtu.be/_VRkNqK6l-o

For double curve switches, there are two categories:
The symmetrical, flat bottom: for each switche, you will have to print 1 "Upper arm.stl" and 1 "Lower closing part.stl", which are in the same directory.
Asymmetrical, reversible: for each switche, you will have to print 1 "Upper arm.stl" and 1 "Lower arm.stl", which are in the same directory.

For triple curve switches:
for each switche, you will have to print 3 "Upper arm.stl" and 3 "Lower closing part.stl", which are in the same directory.
Be careful, the triple curves have a fairly small radius of curvature. Slightly long wagons and locomotives or with axles with low lateral leeway may encounter some difficulty in passing them.

I would love to see your prints and the circuits you can do. Your creativity is very inspiring. Don't hesitate to post makes.