Mechanical Dice Tower - Trap Door

All 3DTechDesigns STLs are protected under Copyright Law.
When purchased on Cults3D you have the right to print it for personal use.
To legally sell prints of my designs a monthly active subscription on patreon is required:
https://www.patreon.com/3dtechdesigns

---

REEL:
https://www.instagram.com/reel/DUV6czZCPL9/?igsh=MW4xaHBlZzh6ZXlnZw==

Presenting the mechanical trap door dice tower. A simple turn of the tower's parapet simultaneously raises the swinging doors and releases the dice into the tower.
At the same time, the tower door opens, allowing the dice to escape and revealing the dice roll.

The mechanism was tested with a standard sized DnD dice set (all 7 dice can be rolled at once)

Assembly:
The assembly is great fun. Every part has its own kind of clicking mechanism, which makes assembling a brease. A large part of the mechanism is print-in-place, meaning it comes fully assembled and functional from the print plate. No extra tools or glue are needed because everything is printed.

Assembly-guide on youtube:
https://youtu.be/lTKUy_VUvBY

Dimensions of the assembled tower:

• 185x135x175mm

Minimum printbed size:
180x180x180mm

Amount of filament needed:
~420g of PLA

UPDATES:
2026.02.20 - V2:

• Replaced "Iron_Gate.STL" with "Iron_Gate_V2.STL" because it showed Errors in some slicers