BB8 Drawstring Beads

I think this is my favourite model yet. I loved BB8 from the moment I saw the first trailer and I think this model cam out great!

Show your love for BB8 and Star Wars with these BB8 inspired Hoodie Drawstring beads.

 

They are about 22mm tall and the hole diameter should come out as approximately 4mm. If you are having trouble getting the string through the bead, try using a toothpick or a small hex key to push the string through.

 

I added two print profiles:

• Full colour
  • Uses approximately 27 grams of filament and prints in 2:36 hours on my A1 with AMS lite
  • I personally like this one the most. Print multiple at the same time to reduce waste and give away the extra beads.
• Single colour
  • less than 4 grams of filament per set
  • easiest to print in about 25 minutes on my A1
• Also check out my R2D2, Mando, Deathstar and Millennium Falcon inspired Drawstring beads 

They should both be very easy to print, but be sure to clean your buildplate for optimal adhesion.

Boost MeIf you like my design, it would mean a lot to me if you gave me a boost to support my work.
Thank you!

You can also support my work on Ko-fi! 
Or, if you're interested in selling physical prints of my designs, check out my commercial license options there.