HAVE A SMURF DAY! Hueforge

Project: SMURF DAY STL.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 140x140mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA+ Sunlu Red Transmission Distance: 6
    PLA+ Sunlu Pure Yellow Transmission Distance: 5
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
    PLA+ Sunlu White Transmission Distance: 5

Boost MePlease consider sending me a coffee! :) or a boost!

This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #13 (1.12mm) swap to Pure Yellow
    At layer #17 (1.44mm) swap to Marine Blue

 

**Add a Pause during marine blue

      Change black to white.

    At layer #19 (1.6mm) swap to White for the rest.