LEGOs Brick Logo Light Box

LEGOs Brick LED Light Box

A simple, blocky light box modelled to look like a classic LEGOs brick. This one’s shaped like a 2x4 stud brick and makes a fun addition to any desk, shelf, or display area—especially for LEG.O fans.

The LED channel is built into the rear section, and I’ve optimised the internal structure to make wiring straightforward. Just run your strip through the internal space and mount the light near the back panel for smooth, even glow.

I used Matte Red for the box body, to help prevent the light from shining through. Ensure you use Basic red for the front plate, however.

The rear box is 2mm thick for extra strength, and I’ve made the inside surface white to help reflect the light better. If you don’t want a multi-colour print, just select the rear plate in Bambu Studio, press N to go into painting mode, and hit “Erase All Painting.”

Details:

• Modelled after a classic 2x4 LEGOs brick
• Internal LED channel for easy lighting
• Stronger 2mm rear panel
• White inside surface for better light diffusion
• Prints well with both smooth and textured plates