Boost Me🔫 By order of the Hall of Justice, press that 🚀 Boost button! Support this model and help bring more law to the MakerWorld sector. Your points help keep justice 3D-printed and free!
Judge Dredd Lawgiver Mk II (1995 Film Version)
🛡️ Two Versions Included – With or Without Electronics Support!
This is a detailed 3D printable replica of the iconic Lawgiver Mark II as seen in the 1995 Judge Dredd film. Designed to capture the futuristic aesthetic of Mega-City One's most infamous weapon, this prop includes two build options:
🔧 Version 1: Electronics-Ready
This version is designed for hobbyists who want to add functional lights and electronics. Features include:
LED Support:
Front barrel has space for 2x 60mm red LED filaments
Rear indicators can be printed in translucent red and blue and backlit with a single 40mm white LED filament
Optional: print light elements in white to diffuse the light more evenly
Power: Runs off a 2xAA battery box with the on/off switch magnetically hidden under the front grip
Easy Access: Grip is held in place using 6x 8mm x 2mm round magnets for quick battery replacement or recharging
Functional Trigger: Uses 2x 4mm x 20mm compression springs for spring-loaded trigger action (non-functional, just tactile)
🎨 Version 2: Static Display
Don’t want electronics? No worries. This version replaces LEDs with printable red and blue parts, making it easy to create a great-looking display piece with coloured filament. No soldering required – just print, assemble, and display.
🛠️ Assembly Instructions
Trigger Assembly
Insert the trigger into the Trigger Guard, ensuring smooth movement
Add the 2x 4mm x 20mm compression springs
Test-fit the Trigger Guard into the Grip (slide it in from the front for easier alignment)
Once satisfied, glue the flat faces where the guard meets the grip, and add a few drops to the front seams
Lower Front & Rear Housing
Glue the Front Lower piece to the Trigger Guard/Grip using 2x 5x5mm pins for alignment
Add the Rear LED Housing (or non-LED version), inserting diffusers or the triangle/square parts depending on your version
Install the rear LED cover to reduce light bleed
Install 40mm White LED filament and secure with a dab of hot glue
Thread power wires through the tube into the Front Lower section
Front LED Assembly
Glue the front diffuser in place, noting the wire cutout
Insert the 2x LED filaments into the holder:
Positives to the center, negatives on the outside
Orient filaments so the brighter side faces the diffuser
Secure with hot glue to prevent sagging
Lower the holder into place; it should rest on the diffuser edges—secure with glue in each corner
Electronics Housing & Wiring
Route wiring through the hole in the Electronics Cover and glue the cover in place
This ensures the battery box sits flush and doesn’t interfere with the filaments
Connect the 2 positives and 3 negatives to the battery box (preferably with built-in switch)
Test before gluing to confirm everything works
Magnets & Final Assembly
Add magnets:
1 in each magnet holder
2 in each hole of the Foregrip (watch polarity!)
Glue the holders into the two Front Lower slots
Attach the Top Slide Lip to the Top Slide (or use the one-piece version) and glue to the top of the grip assembly
Add Top Barrel and Bottom Barrel pieces, aligning seams downward
Add Bottom Barrel Round, Mag Bottom (using pins), Safety, Mag Release, and Left Side Button
Finishing Touches
Weathering can be applied using silver Rub 'n Buff or AK’s Silver Metallic Wax
Use a cloth wrapped around your finger to lightly apply it to edges, corners, and high-wear areas like the trigger
🏆 Includes a themed display stand inspired by Mega-City One industrial design
ASTDrones
