Key Tag | With Hinge

An alternative version of my print-in-place keytag but with a common printed filament hinge. So you can print it in PLA without any concerns and do not have to use PETG. The keytag consists of 2 separate parts that are connected with a piece of 31mm long filament. It is printed flat on the print bed so you can make use of your different print plate textures. It closes with a nice press fit and shouldn't open even when dropped from normal standing height.

Print Settings

0.2mm layer height

no supports

4 walls

4 bottom shell layers

5 top shell layers

wall generator: arachne

transitioning threshold angle: 30°

Dimensions

Lenght 54mm

Width 25mm

Height 3.5mm

Keychain Holes: 

5mm

3.5mm

Additional Parts

1 x 31mm piece of filament (Ø 1.75mm)

Assembly 

Cut a 31mm long piece from your filament, thread it into the hinge and push it all the way in with some pliers for example.

Note
Make sure you have dried your Filament properly and use a clean build plate.

Optional

Once you tested the print you can duplicate the objects and print multiple ones at the same time. I still recommend printing each pair by object and not by layer. Please don't upload extra print profiles just for that.

Happy Printing!

You may also like:

Keytag with living hinge from PETG

https://makerworld.com/en/models/699200-key-tag-print-in-place#profileId-628453

Keytag without a hinge

https://makerworld.com/en/models/1134704-key-tag-no-hinge#profileId-1135646