Brazilian Toll Tag (sticker) Holder (Sem Parar...)

Keep your windshield clean and your toll tag portable! This 3D printed holder is designed specifically for the standard toll tags stickers used in Brazil (such as Sem Parar, Veloe, ConectCar, C6 Tag, etc.).

Instead of using the strong permanent adhesive that comes with the tag, this holder allows you to mount it to your windshield using suction cups. This is perfect if you switch cars frequently, use rental cars, or simply want to avoid sticky residue on your glass.

Key Features:

• Non-Destructive: No need to stick the tag's adhesive to the windshield.
• Easy Access: The tag slides in and out easily, allowing for quick removal if needed.
• Stylish Design: Features a Voronoi/spiderweb pattern that is lightweight and aesthetically pleasing.
• Universal Fit: Designed for standard 25mm suction cups.

Hardware Required:

• 2x Suction cups (25mm diameter head).

Printing Instructions:

• Material: PETG, ABS, or ASA is highly recommended. Do not use PLA, as it will likely warp or melt due to the heat inside a car parked in the sun.
• Layer Height: 0.16mm.
• Infill: 15-25% (The model is mostly walls, so infill matters less).

• Supports: YES

  #####################################################################

Este é um suporte para TAGs de pedágio (modelo cartão), compatível com a maioria das operadoras brasileiras (Sem Parar, Veloe, ConectCar, Tag C6, etc.).

O objetivo deste design é evitar colar a TAG diretamente no vidro com aquele adesivo forte. Com este suporte, você utiliza ventosas, o que facilita a troca da TAG entre carros ou a remoção para limpeza, sem deixar resíduos de cola no parabrisa.

Características:

• Encaixe fácil da TAG (basta deslizar).
• Design estilo Voronoi (leve e bonito).
• Feito para ser usado com duas ventosas de 25mm.

Recomendações de Impressão:

• Material: Use PETG, ABS ou ASA. Não recomendo PLA, pois ele irá deformar com o calor do sol no painel do carro.
• Suportes: SIM