Filament spool shelf honeycomb

Designed my own filament spool shelf in honeycomb design. There are 3 versions, for 1" inch wooden dowel, 23mm dowel and 20mm dowel. Used 2pcs M5 wall screws per bracket, spacing between top and bottom screw is 95mm. Its designed just to slid onto mounted screws, witch should have 5mm space between screw head and wall.

Added template for easier drilling holes and adjust right screw distance, also added plane if you want to you use spirit level.

Added endcap for those whom wooden dowel extends from shelf bracket to prevent filament spool tipping over. Also made divider so you can separate different type of filaments from each other on one shelf and not mixing them accidentaly. Here: https://makerworld.com/en/models/117747#profileId-126576

Also added filament material tags so you can separate different type of filaments from each other, here:

https://makerworld.com/en/models/117775#profileId-126618

Added accessories to utilize honeycomb holes for some holders. link here:

https://makerworld.com/en/models/1129702#profileId-1129747